The Process of Installing Replacement Windows
Since installation of replacement windows is an infrequent event and can only take place if the homeowner is planning to get rid of all the old windows and replace them with new ones, the installation process is something to be learned on, especially since it’s dealing with a fragile material. It is always good to seek out for replacement windows, since they are designated as builder grade or contractor grade windows, which are relatively cheaper.
You have to consider that replacing all your windows in the house will mean allowing the window installers to enter each room just so they can install the new windows; therefore, it is recommended that you stay at home, take off from work or bring your work at home, so you can monitor the installation process, as well as keep watch over your valuables. To avoid any temptations or the possibility of theft from any of the installers, better put your valuables away in a safe or locked them in a locked cabinet. The thing about having window installers at home is to be visible to them and managing a work crew and be within calling distance if there are specific questions they need to verify first before the actual installation.
The first day of installation should be a thorough discussion with the foreman on your conditions while installation is going on, and they are: drop cloths inside the room must be properly placed and drop cloths outside must also be installed for protecting your flowerbeds, no tools should be left in the house, rooms are broom-clean, the removal of old windows left outside the house, and no windows left open for installation the next day. Expect that if it is a multi-crew working, one batch will be removing the old windows and another batch will be bringing in the replacement windows, this means that there is a simultaneous procedure of removal and installation going on at the same time, so that at the end of the day, expect that 10 new windows will be installed in day 1.
A Simple Plan: Services
In Day 2 the task of removing the old windows and replacing with the new ones will continue, but it is expected that the installation job will normally conclude in Day 2. The next batch of work, after the completion of the new window installation is the installation of the exterior trim or cladding inside each window, which is need to to tightly seal the window against inclement weather conditions. In most installation time, it will take about 3 days to complete the entire installation work, since after installing the extended trim, another batch of extended trim will have to be installed outside the windows until all have been completed and, after which, all windows are tested.Windows Tips for The Average Joe